What's in the box and the first charge
Based on the unboxings we've seen, the standard box includes the console, a USB-A to USB-C cable, a user manual and the microSD card or cards in the capacity you chose. Contents can vary from batch to batch, and we confirm them before you order. One thing to know before you open it: no charger is included. Use a 5 V USB wall adapter rated for at least 1.5 A, such as your phone charger if its specs match, and plug the cable into the USB-C port marked DC on the bottom edge. There's no need for a powerful adapter: the label on the back says 5 V and 7.5 W.
The 4000 mAh Li-Po battery, with its capacity printed on the back label, deserves a full first charge before a long session. Battery life is up to 6 h announced by the manufacturer, and in practice it varies with brightness, volume, the emulator and the game. While it charges, look for the small status LED between Select and Start: it shows the console's status, and how it behaves depends on the installed system.
Two card slots: TF1 for the system, TF2 for games
The console has two microSD slots, and their roles are not interchangeable. The TF1 slot, on the right side, holds the system card: it contains Linux, the menu and the emulators. The TF2 slot, on the left side, takes the games card, the one you fill yourself. This split has a real benefit: you can remove, copy or replace the games card without touching the system. The supported capacity to keep in mind is 128 GB maximum. A bigger card won't make the console faster, it just gives you room for more games.
On the bottom edge you'll find three connectors: the USB-C port marked DC for charging, the 3.5 mm headphone jack in the center, and a second USB-C port, the OTG port, for USB accessories, depending on the firmware. Don't mix up the two USB-C ports: the DC port is the one for charging. On the sides, the Power and Reset buttons are on the left and the volume rocker is on the right. There is no HDMI output.
| Part | Location | What it does |
|---|---|---|
| TF1 slot | Right side | Holds the system card: Linux, menu and emulators |
| TF2 slot | Left side | Holds the games card you fill yourself |
| USB-C DC port | Bottom edge | Charges the 4000 mAh battery with a 5 V adapter rated for at least 1.5 A |
| USB-C OTG port | Bottom edge | USB accessories depending on the firmware, such as a Wi-Fi dongle sold separately |
| 3.5 mm headphone jack | Bottom edge, center | Connects wired headphones or earbuds |
| Power and Reset buttons | Left side | Turn the console on and reset it if it freezes |
| Volume rocker | Right side | Adjusts the volume |
First boot and a tour of the menu
First, make sure the system card is fully seated in the TF1 slot, then press the Power button on the left side. The console boots into a factory Linux image, ArkOS on some batches, with an EmulationStation-style interface. The fully laminated 4-inch square IPS screen, at 720 × 720 pixels, shows a sharp, easy-to-read menu. If the screen stays black, plug the console into the DC port for a few minutes and check the card's position before trying again. Then set the brightness to a comfortable level, since it's also one of the factors that affect battery life.
The home screen shows the list of systems. Scroll through it with the D-pad, then open one to see its games. Depending on the firmware, a system with no games may not show up at all, so a short list at first is perfectly normal if the TF2 card is nearly empty. Sound settings, display settings and the shutdown option are in the main menu. How to open it depends on the firmware, so check its documentation.
The controls, from the D-pad to the soccer ball button
The front uses a classic layout. The D-pad sits on the left and the four ABXY buttons form a diamond on the right: X on top in blue, Y on the left in green, A on the right in red, B at the bottom in yellow. Two analog sticks sit in the lower corners for games that use them. Between the D-pad and the buttons, the speaker grille is shaped like a little soccer field. On the back, four triggers, L1, L2, R2 and R1, line up above the sculpted grips that rest under your palms.
The Select and Start buttons are heart-shaped, with the status LED between them. The round FN button, printed like a soccer ball, can spin under your finger. What it does depends on the installed firmware, and any button combinations are described in that firmware's documentation. Take a few minutes to learn them before starting a long session so you don't quit a game by accident.
Adding your own games from a computer
Start by shutting down the console from the menu, then remove the games card from the TF2 slot on the left side. Insert it into your computer with a microSD card reader. If the card is already set up, it contains folders for the different systems, and their exact names depend on the firmware. Copy each file into the folder for the system it belongs to: a game in the wrong place won't be picked up by the right emulator. Only use games you have the right to use, such as indie titles their creators distribute for free.
Safely eject the card on your computer, put it back in the TF2 slot and power on. If the new games don't appear, use the menu option to update the game lists, or restart the console. The R36 Max has no built-in Wi-Fi and no Bluetooth, so box art and descriptions aren't downloaded automatically from the internet. A USB Wi-Fi dongle in the OTG port may work depending on the firmware; it's sold separately, with no guarantee of online play.
- Shut down the console from the menu before removing the card.
- Copy games into the correct system folder on the TF2 card.
- Safely eject the card on your computer.
- Reinsert the card, power on, then refresh the game list.
Saving your progress and shutting down safely
There are two ways to save. The in-game save, the one the game already offered on its original console, records your progress at the points the game allows. Save states freeze the exact moment you're at, but whether they're available and how they work depends on the emulator. Get in the habit of using the in-game save when there is one, then quitting back to the menu before shutting down, so the file is fully written to the card.
To turn it off, use the shutdown option in the menu instead of cutting power abruptly: losing power during a write can corrupt the data on a card. Also back up the contents of both cards to a computer regularly. Finally, the R36 Max sold here is the original square-screen model, not the R36 Max2, and we check the hardware revision of every batch before shipping.
Frequently asked questions
Can I play the R36 Max on a TV?
No. The console has no HDMI or TV output: you play only on its 4-inch square IPS screen. The connectors on the bottom edge are for charging, headphones and, through the OTG port, compatible USB accessories depending on the installed firmware.
Why does my card show less space than its advertised capacity?
That's normal: after formatting, usable space is always lower than the rated capacity, whether it's a 64 GB or a 128 GB card. Picking one or the other changes how many games you can store, not how the console performs.
Do 4:3 games look stretched on the square screen?
Displayed without stretching, a 4:3 game keeps its proportions on the 720 × 720 panel, with bars above and below the image. The available display options depend on the system and the emulator, so explore that emulator's settings rather than looking for one universal setting.
Should I install a different firmware on the first night?
There's no need: the console works with its factory Linux image. Community firmware exists, such as ArkOS builds for the R36 Max, but installing it is at your own risk. If you decide to go ahead, back up both cards first so you can roll back.
Sources
- Handhelds Wiki, R36MAX
- Retro Catalog, R36 Max specifications
- Retro Handhelds, R36MAX first impressions (December 2024)
Our guides are based on the supplier's product sheets and public documentation. We don't claim any hands-on testing.